Asmith-Industrial Hardware

>Products > e-Wrenches > Digital Torque Wrenches

Digital Torque Wrenches

WQ series - Digital Torque Wrench & Electronic Torque Wrench

WQ(-C) series (4.5~1000 Nm)

Features

1. Use the piezoelectric effect converted into accurately torque value.
2. Two modes : F(Track) / K(Peak).
3. Warning function : Beep, LED indicator. ( When reach the torque setting value 80%)
4. Vibration function : When reach the torque setting value 90%.
5. Four torque units are available : N-m, ft-lb, in-lb, kgf-cm.
6. Automatically powers off when not in use for 2 minutes. ( The non-shutdown mode can be customized )
7 .Can store 30 memory setting values.
8. LCD backlight display.
※※ Suggested accessories: Socket and Bit Socket. ※※
➤Content : Provide storage steel box x1, Certificate of calibration report (Using ISO specification) x1, Operator’s menu(Bilingual) x1

★【Customized】Digital torque wrench-rechargeable, delivery time is about 2-6 weeks, Recharge Type:including USB plug (Type C)"

Catalog Resource Inquiry ☑️

　Unit: mm [※1 kgf ≒ 10 N]SPECIFICATIONS

Item No.	Suggested Range	Setting Range	Drive (inches)	Accuracy	Preset Accuracy		Ratchet Teeth	Resolution	Length	Weight (g)	Approximate Range Of Applied Force (kgf)
Item No.	Suggested Range	Setting Range	Drive (inches)	CW	CW	CCW	Ratchet Teeth	Resolution	Length	Weight (g)	Approximate Range Of Applied Force (kgf)
WQ-30-1	4.5~30 Nm	1.5~30Nm	1/4"	±1%	±1.5%	±2.5%	72	0.01 Nm	410	720	1.5~10
WQ-30-2	4.5~30 Nm	1.5~30Nm	3/8"	±1%	±1.5%	±2.5%	72	0.01 Nm	410	740	1.5~10
WQ-60-2	9~60 Nm	3~60Nm	3/8"	±1%	±1.5%	±2.5%	72	0.01 Nm	410	740	3~20
WQ-135-2	20~135 Nm	6.8~135Nm	3/8"	±1%	±1.5%	±2.5%	72	0.1 Nm	434	890	6~43
WQ-135-3	20~135 Nm	6.8~135Nm	1/2"	±1%	±1.5%	±2.5%	72	0.1 Nm	454	1080	5~40
WQ-200-3	30~200 Nm	10~200Nm	1/2"	±1%	±1.5%	±2.5%	72	0.1 Nm	565	1300	7~45
WQ-340-3	50~340 Nm	17~340Nm	1/2"	±1%	±1.5%	±2.5%	72	0.1 Nm	666	1420	9~62
WQ-600-4	90~600 Nm	60~600Nm	3/4"	±1%	±1.5%	±2.5%	24	0.1 Nm	940	3800	11~77
WQ-800-4	120~800 Nm	80~800 Nm	3/4"	±1%	±1.5%	±2.5%	24	0.1 Nm	1235	4800	11~75
WQ-1000-4	150~1000 Nm	100~1000Nm	3/4"	±1%	±1.5%	±2.5%	24	1 Nm	1235	4800	14~93

Note1: The accuracy range for torque is from 20% to 100% of the maximum operating value.
Note2: Accuracy (cw) means that the clockwise calibration in the factory will be based on the factory accuracy, preset accuracy is a general reference.
Note3:The applied force (kgf) = recommended torque (kgf∙cm) / effective length (cm) (distance from the center of the handle to the center of the torque application point).
Note4:Operations requiring more than 50 kgf must be performed by two people or require additional extension rods.
Note5:★ indicates custom-made products, with long lead times required.

※1 Nm=10.2 kgf-cm=0.738 lbf-ft=8.851 lbf-in

Charging Cable

Rechargeable Type Features

Digital Torque Wrench - Cordless" utilizes the latest USB-C charging method that complies with EU standards.
It retains 80% of its capacity even after 300 recharges and has a battery life of up to 3 years (replaceable and serviceable).
With frequent use, it saves approximately 100 zinc carbon batteries a year, making it suitable for users who tighten screws frequently."

IC Protection with Dual Safeguards

To ensure the stability and safety of the charging and discharging process for user protection, the circuit board incorporates a series of protective mechanisms:
⚡ Over-discharge protection - It cuts off power in case of excessively low battery levels to prevent a reduction in battery lifespan.
⚡ Overcharge protection - When the battery reaches full charge, the circuit is disconnected to prevent overcharging.
⚡ Overcurrent protection - The circuit is interrupted in cases of excessive charging or discharging.
⚡ Over-temperature protection - Charging is halted if the temperature exceeds 55 degrees Celsius during the process.

Furthermore, it includes a voltage stabilization mechanism, reverse current protection, and dual-circuit protection ICs, providing you with added peace of mind during use.

The illustration of using wrench handle.

Digital Torque Wrench Demo (Please turn on subtitles )

Similar Products

WI series - Interchangeable 14x18／Digital Torque Wrench & Electronic Torque Wrench

WI(-C) (14x18)

WA series - Angle／Digital Torque Wrench & Electronic Torque Wrench

WA(C)

WI series - Interchangeable 9x12／Digital Torque Wrench & Electronic Torque Wrench

WI(-C) (9x12)