Asmith-Industrial Hardware

> Service > News

News

Service

2022 New Products

CS-3780-W-1

CS-3780-W-1 (Assistance Latch)

Spring Wire Loop Latch, Draw Latch｜The proposed load 35 kgf, with metal elastic arc hook.
Special hook design can easily and directly lock or hooked screws without latch keeper.Make use of assistance latches and R-pin hole to do an additional protection, avoid seriously vibrating, suddenly opened, and loading huge capacity.
➤Material: SUS304(Stainless steel)-vibration ground.
Learn More→

ES-170

ES-170 series

Pull Handle, Vinly Pulls｜Small handle. Easy to assemble.
ES-170 (SUS304): Apply to Electrical equipment, portable outdoor equipment, inspection equipment.
➤Material-Holder: SUS304-Vibration ground.
➤Material-Reinforcing Plate : SUS301(Stainless steel)-Natural
Learn More→

AS-2500

AS-2500A, B, W (Heavy Duty Butt Hinge)

Heavy Duty Butt Hinge｜Loading included 50kgf.
Size: 40*40mm. Thk.: 5mm
➤Material: SUS316 (Stainless steel)-brushed finish/black coated/high gloss polished.
Learn More→

BZ-03(2X or 3X)W series - Bright chrome, Compression Pawl / Cam Lock Latches

BZ-03(2 or 3)W series - (Bright Chrome Compression Pawl / Cam Lock Latches)

This compression latch has good waterproof (IP66) and against vibration.
➤Material-body: Zinc alloy-bright chrome. In accordance with RoHS.
Learn More→

AS-08 series - Automatic Rebound Butt Hinges

AS-08 series - (Automatic Rebound Butt Hinges )

The panel could be back as usual automatically with this hinges after opening the panel and avoid accident happening.
➤Material: SUS304(Stainless steel)-vibration ground.
Learn More→

AS(T)-23(2) series - Flag Type

AS(T)-23(2) series- Flag Type (Lift-Off Hinges)

Medium Lift-Off Hinge, Flag Hinge｜Thickness 2.5mm.
Two types: left hinge and right hinge. It can be installed and dismantled quickly.
➤Material: SUS304(Stainless steel)-vibration ground. SPHC(hot-rolled steel)-zinc plated & natural. Electric welding, screw-on / rivet-on.
Learn More→

★2021 New Products★

AT-2320

AT-23 series - Flag Type (Lift-Off Hinges)

Medium Lift-Off Hinge, Flag Hinge｜Thickness 2.5mm.
Two types: left hinge and right hinge. It can be installed and dismantled quickly.
In accordance with RoHS.
➤Material: SPHC-PO, zinc plated, screw-on / rivet-on.
Learn More→

★2020 New Products★

AS-2940

AS-2940 - Thickness-4mm

Truck Deck Door Hinge｜The hinge thickness is 4mm.
Suitable for middle & small sized vehicles side panel, truck and transportation equipment.
➤Material: SUS304(Stainless steel)-vibration ground.
Learn More→

CS-0240

CS(T)-0240 - Thickness-4mm

Adjustable Heavy Draw Latch｜High loading 145 kgf.
Standard lock-hole available padlocks to prevent from the accident, applicable to molds.
Each Draw Latch was treated with a shaving edge to eliminate the sharpness, so there is no need to have protective cover in the produce process.
➤Material: SUS304(Stainless steel)-vibration ground, SPHC(hot-rolled steel)-zinc plated
Learn More→

CS(T)-0242 - Thickness-4mm

Adjustable Heavy Draw Latch｜High loading 145 kgf.
Each Draw Latch was treated with a shaving edge to eliminate the sharpness, so there is no need to have protective cover in the produce process.
➤Material: SUS304(Stainless steel)-vibration ground, SPHC(hot-rolled steel)-zinc plated
Learn More→

GN-SEA0753

GN-SEA0753 (Nylon Fixed Wheel, SUS304)

Load capacity 200 kgf. Wheel diameter 3" inches.
Applicable to medical equipment, and semiconductor electronics industry.
➤Material-Housing: SUS304
Learn More→

GR-SEA0753

GR-SEA0753 (Rubber Wheel, SUS304)

Load capacity 200 kgf. Wheel diameter 3" inches, including the bearing.
Special dust-poof hubs design.
➤Material-Housing: SUS304
Learn More→

CS-0220-3 keeper

CS-0220-3 - Vertical Keeper

Apply toCS-0220 and CS-0222
➤Material: SUS304(stainless steel)-vibration ground.
Learn More→

CS-0230-3 - Vertical Keeper

Apply toCS-0230 and CS-0232
➤Material: SUS304(stainless steel)-vibration ground.
Learn More→

E-170B

E-170 series (Black Holder)

Pull Handle, Vinly Pulls｜Small handle. Easy to assemble.
Suitable for box cover and toolbox body.
Working temperature between -20°C~75°C. Resistance to acid, alkali and greasiness.
➤Material-Holder: Cold-rolled Steel (SPCC), black.
Learn More→

CS-02 Lockable

CS(T)-02 series - Lock Hole

★Customize: with Nut + Washer MOQ100 (As shown below)
Learn More→

CS(T)-02 series

★Customize: with Nut + Washer MOQ100 (As shown below)
Learn More→

#538 Rod Holder

#5383 Rod Holder For Φ9 Rod

For adjusting the tightness and length of the rod latch system.
Non-dust from operating the rod latch system.
For Φ9 Rod - #479, #489
Learn More→

2023-03-16
➤2024 New Products

2016-09-06
★Dealers Wanted★

2022-04-28
Wheel Materials Info.

2018-02-07
Asmith Calendar

2022-01-18
2022 New Products

2021-06-04
2021 New Products

2020-12-31
2020 New Products

2019-12-31
2019 New Products

2018-12-31
2018 New Products

2017-12-31
2017 New Products

2017-02-06
2D, 3D download

2017-01-06
LINE & Messenger

2024-02-06
Chinese New Year~

2017-09-15
Website revision

2019-05-13
7/5-9 Company trip

2017-02-24
TÜV Rheinland